Legs and base before slab top was attached
After much discussion with Neil Erasmus we decided to give the coffee table strength and allow movement I would have to place a tapered piece of MDF painted black underneath the table top. This I attached using stainless steel screws. The legs would be attached using 5/16th, 1" 1/4 stainless steel bolts.
One slab of Yorkgum measuring 1400mm L x 650mm W x 26mm D. This slab was cut from around Willaims in Western Australia.
Finished legs - ready to be finished and oiled.
After 24 hours in the vacuum bag laminated legs and plastic wrap are removed.
